Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-30-2014, 10:35 PM | #1 | |
AF Newbie
Join Date: Jul 2006
Location: fort worth, Texas
Posts: 50
Thanks: 0
Thanked 0 Times in 0 Posts
|
In line. 6 oil in cooling system
Have this in line 6 cyl runs good but is getting oil in the cooling system pulled head did not see any thing that looked like it might be letting the oil into
Cooling system. Do the heads have a problem? |
|
02-01-2015, 09:08 AM | #2 | |
AF Regular
Join Date: Dec 2007
Location: City, Missouri
Posts: 241
Thanks: 1
Thanked 10 Times in 10 Posts
|
Re: In line. 6 oil in cooling system
When pulling heads off of a vehicle I would recommend checking the heads and the block for flatness.
*Cylinder Head Flatness- 0.03 mm per 25 mm (0.001 in. per 1 in.) 0.05 mm per 152 mm (0.002 in. per 6 in.) MAX Flatness 0.20 mm - max for total length *Block Flatness- 0.03 mm per 25 mm 0.001 in. per 1 in. 0.05 mm per 152 mm 0.002 in. per 6 in. MAX Flatness- 0.20 mm (MAX) for total length 0.008 in. MAX) for total length |
|
|
POST REPLY TO THIS THREAD |
|
|