Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
10-27-2013, 09:00 AM | #1 | |
AF Newbie
Join Date: Oct 2013
Location: Reston, Virginia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Cannot drain coolant in my 02 Liberty
I recently purchased a used 2002 Jeep Liberty that had basically been neglected when it came to regularly scheduled maintenance. I have had the radiator flushed since I bought it, but am experiencing heat problems with just luke warm heat. Using the suggestions I've read on this forum and on youtube I've flushed out the heater core with a hose, but it didn't seem to work, so now I'm about to change the thermostat out.
Here's my question: I CANNOT SEEM TO DRAIN THE RADIATOR! I know I can just undo the lower hose, but still, I would just like to know WHY I can't drain it the normal way. I have opened the coolant bleed on the top with an allen wrench and then taken out the plug at the bottom of the radiator, but it's only a few drips. I even tried to open the reservoir cap when the other two were open, resulting in it overflowing from the coolant bleed hole. What am I doing wrong here???? |
|
10-31-2013, 10:51 AM | #2 | |
AF Enthusiast
Join Date: Dec 2001
Location: clarksville, Tennessee
Posts: 1,719
Thanks: 26
Thanked 185 Times in 181 Posts
|
Re: Cannot drain coolant in my 02 Liberty
Probably nothing. Lower drain opening is probably plugged with gunk.
__________________
Post back, that's what makes Forums Work. |
|
12-08-2013, 07:12 PM | #3 | ||
AF Enthusiast
Join Date: Sep 2006
Location: Athens, Georgia
Posts: 4,662
Thanks: 0
Thanked 64 Times in 64 Posts
|
Re: Cannot drain coolant in my 02 Liberty
Quote:
|
||
|
POST REPLY TO THIS THREAD |
Tags |
antifreeze , bleed , coolant , drain , flush |
|
|