obd trouble with misfire

Hi,

I read outmy Lumin and catch freeze Data, and Cylinder 3 and sometimes other have misfire, number 257.
Sometimes Cylinder 6 have 13 or 1. Its variable, after restart the engine cylinder 4 have 257 misfire...

Has anybody an idea?

Aside from the readou,t what does the car run like, any symptoms?

No the Lumina runs fine, I feel the engine runs not round but the idle speed is constant by 735...

Can anybody pls inspect the freeze datas, and tell me if all right. Thx.

No misfire counts or history, no issues there. Try cleaning the throttle body and idle air control.

Thx, what is about the Trans Values? Are they ok?

I did change spark plugs and wires and ignition coils, cos 2 of contacts was rusted. Now I didnt have any misfires...

Solenoid commanded functions look normal, but a solenoid could still be bad, but that would set a code after a certain number of drive cylcles.

Here is the Freeze Fram Data after drive a while...

What is about 2-3 Shift Error 0,2? What did they mean?

You are over analyzing this complex info, the pcm is looking at shift timing, in tenths of a second, your trans adaptive shift pressures are 0 which means the pcm does not detect internal slippage, this is good.