geo parts cars

got 2 91 geo metro parts cars that are going to the crusher monday if anybody needs anything off them before i send them let me know

Engines? tranny? half-shafts?

What do you have left on them?

Where are you located? I am in CA. Looking for a 1.0L engine & tranny to rebuild.

I'm lookin' for light grey or possibly blue grey dash, but not charcoal black.

Want all the dash, door panels, handles, windshield pillar trim, sunvisors in preferably light grey or if not even the blue grey.

Transforming the interior of my 91 Vert. :)

Thanks!

has a decent running 1.0 and 5 speed. car was wrecked in front but drove it home, clutch slips but tranny shifts fine and engine doesn't seem to smoke. if you just want something to rebuild i have about 6 core motors, most were runners with a burned valve. the interior is the blue/grey except for the headliner, its grey. think everything was in decent shape but can check it. the dash will fit 89-91, its the square dash with the pushbutton lights and wipers. also have a 94 if your looking for the rounder dash

I found that blue/grey dash at the local pick-n-pull, but I didn't have time to get all the stuff I wanted, since I found a suzuki swift gt that had just arrived and there were too many goodies off of that and not enough daylight. :)

I'm really looking for the light grey like 92-94 years grey color, but in the square dash. I think that the light grey square dash and interior only came on 89-91 suzuki swifts.

If you have the blue grey interior, and aren't charging an arm and leg to get it to me, I'll prolly take it. I'm in the sf bay area, pretty close to Brad, so perhaps we can ship all that stuff together.

has a decent running 1.0 and 5 speed. car was wrecked in front but drove it home, clutch slips but tranny shifts fine and engine doesn't seem to smoke. if you just want something to rebuild i have about 6 core motors, most were runners with a burned valve. the interior is the blue/grey except for the headliner, its grey. think everything was in decent shape but can check it. the dash will fit 89-91, its the square dash with the pushbutton lights and wipers. also have a 94 if your looking for the rounder dash

How much do you want for a 1.0 motor core?

How about the 5spd transaxle?

Where are you at? Can you ship to CA?

will send you a motor core for $60+ shipping. do you want a 5 speed that i have test driven or one i know nothing about. i have 2 that i know are good that worked fine and i have another one that i know nothing about, was in back of a parts car i got. should be able to ship them to you UPS or Greyhound. if you want to figure postage should be about 60-80 pounds each from Bellingham WA 98226

will send you a motor core for $60+ shipping. do you want a 5 speed that i have test driven or one i know nothing about. i have 2 that i know are good that worked fine and i have another one that i know nothing about, was in back of a parts car i got. should be able to ship them to you UPS or Greyhound. if you want to figure postage should be about 60-80 pounds each from Bellingham WA 98226

Well I want something that you think would be a good first timer rebuild project.

Cheapest shipping from UPS is about $65. That is ok by me.

Oh and does the engine come with flywheel or distributor?

i have some flywheels, would just raise the shipping cost a little but won't charge you extra for the flywheel. have to see what i have for distributors, depends on year of car what one you need. i do have a couple sets of axles. these engine don't have intakes or exhaust manifolds cause i usually swap them onto new motor when i install them but i might have a few spares depending on year of car again

i have some flywheels, would just raise the shipping cost a little but won't charge you extra for the flywheel. have to see what i have for distributors, depends on year of car what one you need. i do have a couple sets of axles. these engine don't have intakes or exhaust manifolds cause i usually swap them onto new motor when i install them but i might have a few spares depending on year of car again

I have a '92 1.0 (mounted in a '90 Metro w/ AT) and a '94 1.0 (mounted in a '94 Metro 5spd) currently. Both will need to be rebuilt. I already have all the parts: intakes, distributor, etc, but I can always use a spare flywheel.

Btw, my machine shop charges $50 to turn the flywheel because he has to back drill the pins. He does nice work though, so I don't mind so much.

Thanks.

You wouldn't happen to have a working AT for my '90 Metro would you?

nope. just some 5 speeds. think you can buy those JDM automatics for about $150 on e-bay. think it was in here but someone said they got a brand new flywheel from pep boys or someone like that for $45. might check into it at your local parts store, might be cheaper than turning it

You wouldn't happen to have a working AT for my '90 Metro would you?

I have a working 96 1.3 Auto...if that will work :dunno:

Let me know,
Jeff

I have a working 96 1.3 Auto...if that will work :dunno:

Let me know,
Jeff


Yes a 96 AT will work on a '90. I think the AT was the same from 89-01 if I am not mistaken.

How much would you take for it and where are you located at?

Chembrad...I pm'd you.

I could use one blue manual interior door handle window crank for my blue 91 interior.

You said that you have some trannies? Would you have one for a 98 Metro 3cyl 5sp? How much? I am down near Tacoma so I could pick it up.

Scott

i have one out of a 93 wagon and one out of a 91 hatchback. think they will both work in your car but might ask geozuki for sure. both work good, i test drove ars before i pulled the running gear out. $70 if you wanna pick one up

will need some parts to fix it up, hatchback with glass, driver tailight assembly and the middle geo piece, have to wait and see with insurance but will try and buy back the car, my estimate was $2500 worth of damage it has 92000 miles
anybody get their car totalled by insurance lately, what happened,
me and my wife drive the car about 5 hours a day for paper routes and running errands, their is a nice red gt on my paper route, swift envy, I like the challenge of keeping up with traffic in my 1.0,
anyone try the 165/70/r12 size of tires, is it worth the trouble of finding them, thinking the car would feel more stable???? but I do need to get through the snow next winter, what are the easiest 13 inch wheels to find for this car and what size tire is optimal
ok enough questions, sorry
thanks for any info

i have the hatch with glass and the tail light but no center piece

I think I have the center piece ,I will chek tonight

Do you have any hatch supports.

yeah, along with a bent hatch with no glass and an awsome clear duct tape hatch window and electrical tape tailight, sweet