Need help with trans
EPtex
03-29-2015, 10:33 PM
1998 montana v6 Im getting codes p0740 p0753 p0758 p01860
A couple of weeks ago I replaced the tcc fuse, becuse it was blowing it and also did filter change and made sure the oil level was right. So two weeks later it sending the same codes, but the fuse is not blown. I already check for power in the pink wire that goes into the trans and it is getting power when on position. Today I drove it for about 15 minutes and as soon as it warms up it starts to cut in and out and have trouble restarting then let it cool down for about an hour it wil start up good then as soon as it warms up it cuts in and out . Also the battery symbol in the dash lights up when it cuts in and out. I thought the problem was taken care, until today. I didn't want to open up the trans ,but if needs to be done so be it.:frown:
A couple of weeks ago I replaced the tcc fuse, becuse it was blowing it and also did filter change and made sure the oil level was right. So two weeks later it sending the same codes, but the fuse is not blown. I already check for power in the pink wire that goes into the trans and it is getting power when on position. Today I drove it for about 15 minutes and as soon as it warms up it starts to cut in and out and have trouble restarting then let it cool down for about an hour it wil start up good then as soon as it warms up it cuts in and out . Also the battery symbol in the dash lights up when it cuts in and out. I thought the problem was taken care, until today. I didn't want to open up the trans ,but if needs to be done so be it.:frown:
Automotive Network, Inc., Copyright ©2024