Ok Some one Please Help

:mad:

I need sme help, yesterday i finally decided to changethe spark plugs in my wifes 2004 Mitsubishi Spyder Eclipse GS, for any one who has done this what a nightmare and i have done mechanic work my whole life!!

ok here goes after putting every thing back i started the car right up wasnt really running good and i was getting ready to shut it off and it quit.
now it wont start at all and keeps blowing ignition fuses, also I tried to hook up my OBD and it wont connect with the car computer.
I have checked every thing i can think of... can any one offer any thing and ideas that may help?

Check ALL AROUND the intake and make sure you didn't pinch any wires. Especially the injector harness on the rear cylinders. Make sure the crank sensor wiring isn't hitting any of the pulleys.

Thanks! :biggrin: Just today after hours of dread I decided that, that had to be the problem so I once again took off the upper intake, and low and behold you are so right! the wire wasn't pinched but some how i had pulled it apart.
So after taking the intake back off and looking I found it fixed it and put it all back together and it now it starts and runs great.
Well at least i learned something new. what a b#@%& to get at and alot to watch out for. I will be better prepared next time. Just wanted to thank you and tell yea you were right. I had thought that but think i was in denial cause i didnt want to take it apart again.:banghead: hehehehe