 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-03-2011, 05:03 PM
|
#1 | |
|
AF Newbie
Join Date: Oct 2004
Location: Bloomingdale, New Jersey
Posts: 40
Thanks: 0
Thanked 0 Times in 0 Posts
|
2002 Mazda Protege5 - OBDII communication failure
Hey all..
I have a 2002 Mazda Protege 5. I failed NJ state inspection for OBDII communication failure. I checked the power pin (16). It was good with 12+ I checked pin (4) being the main ground and pin (5) being the signal ground.They are good too. I tried disconnecting the battery for a while. That didn't help. I checked every fuse I could find in the engine compartment and under the driver side dash with a volt meter. All is good. The car runs perfect with no engine light on. I have a simple OBD II scanner that keeps coming up ERR with KOEoff and with KOEon.. I tried using the scanner on a toyota and the scanner worked fine.. Would anyone have a solution as to what I can troubleshoot? I read somewhere on the internet that a 2002 Mazda can either be OBDII or CAN.... Just for reference, the pins on the connector have wires in 4,5,7, 13 & 16 Thanks Rick |
|
|
|
|
10-13-2014, 10:59 AM
|
#2 | |
|
AF Newbie
Join Date: Oct 2014
Location: Trenton, New Jersey
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
the same is happening to me but I got 2 lights on, In the dashboard they are ABS and E-BRAKE lights on, whenever the ABS light turn off the E-brake trun off too. helllllpppp..... please....
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
