 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Cutlass Series Includes Cutlass Ciera, Cutlass Cruiser, Cutlass Calais, Cutlass Supreme, Custom Cruiser, as well as the GM N-Body subforums. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
11-18-2014, 07:26 PM
|
#1 | |
|
AF Newbie
Join Date: Mar 2012
Location: Chesapeake, Virginia
Posts: 7
Thanks: 4
Thanked 0 Times in 0 Posts
|
96 cutlass ciera 3100
my wife used my car today for work then came home and when I started it up to go to my work the rpm's were higher than normal, so I was tapping some components on and around the engine (lightly) to see if a component was stuck, in a hurry to get to work and I tapped on this one component, in the attachment, and the engine stopped, so the component looks like its part of the fuel rail, I think for the injectors, back side of manifold driver side and lines up with one of the manifold bolts, it has a connector on the back side of the component coming from the bottom up and into the part and a small tube that connects with the part as well. Anyone knows anything on this engine and like to help I would appreciate it.
|
|
|
|
|
11-18-2014, 07:43 PM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Mar 2012
Location: Chesapeake, Virginia
Posts: 7
Thanks: 4
Thanked 0 Times in 0 Posts
|
Re: 96 cutlass ciera 3100
also, it starts but won't stay started, with in a second it dies.
|
|
|
|
|
|
11-19-2014, 07:43 AM
|
#3 | |
|
A990 racer
 Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,988
Thanks: 25
Thanked 380 Times in 372 Posts
|
Re: 96 cutlass ciera 3100
Looks like the map sensor, wouldn,t cause this. Check fuel pressure for starters.
__________________
|
|
|
|
|
| The Following User Says Thank You to maxwedge For This Useful Post: |
mhillmst (04-05-2015)
|
|
11-21-2014, 02:46 PM
|
#4 | |
|
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: 96 cutlass ciera 3100
Like Max said, that is your MAP sensor....check for vac leaks....
|
|
|
|
|
| The Following User Says Thank You to Tech II For This Useful Post: |
mhillmst (04-05-2015)
|
|
02-06-2015, 12:34 AM
|
#5 | |
|
AF Newbie
 Join Date: Feb 2015
Location: Lake Mills, Wisconsin
Posts: 22
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: 96 cutlass ciera 3100
Code the ECM. It will tell you whether it's MAP sensor: Low Vacuum, High vacuum and anything else that may be wrong for a start.
|
|
|
|
|
| The Following User Says Thank You to jinxyzboi For This Useful Post: |
mhillmst (04-05-2015)
|
|
04-05-2015, 11:49 AM
|
#6 | |
|
AF Newbie
Thread starter
Join Date: Mar 2012
Location: Chesapeake, Virginia
Posts: 7
Thanks: 4
Thanked 0 Times in 0 Posts
|
Re: 96 cutlass ciera 3100
Good day, to maxwedge, jinxyzboi and tech II. I didn't mean to forget to thank you all for your knowledge. It was a vacuum issue, the one under the air intake near the MAF. Fixed the issue and haven't had any trouble since. Thanks again.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
