Bolt Specs & Thread Size for Front Hub and Speed Sensor

[blk95lumina]

Hello,
Need to replace the front hub and front wheel speed sensor bolts on a 95 Lumina LS 3.1L w/ ABS.

Everything is rusted to the point at which a torch will be required.

Anyone know the specs for these bolts?

Thanks.

[Tech II]

There are no speed sensor bolts....the sensor is part of the hub.

Just an axle nut, and 3-13mm bolts on the inside......these usually come with the new hub......

If specs are not in instructions in box, a place like Autozone can get you the specs online, especially if you buy it from them....or sign up with them, it's free, and you can look up the specs yourself....

[blk95lumina]

Turns out I got everything apart without a torch, kept the same old hubs and bolts and been over a year now and everything is still going good. Still the original hubs. Had to take it all apart to replace the front axle seals. And the speed sensor actually did have a bolt and 2 alignment pins. That one bolt on the speed sensor took more time than any other b/c it was smaller and rusted the most. Still running the original CV axles too. Not a single tear in any of the boots.