 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
04-07-2009, 08:31 PM
|
#1 | |
|
AF Newbie
 
Join Date: Mar 2009
Location: quebec
Posts: 83
Thanks: 0
Thanked 0 Times in 0 Posts
|
92 camry v6 tranny problem
i have 92 v6 automatic when the tranny is cold the tranny runs perfectly after few minutes... nothing in drive and reverse... the fluid level is ok the color too it is maybe just the filter or a sensor problem??? i need help!
the car are ever runs pefectly and its begin suddently when i was going to work one morning thanks bob Last edited by nova73noir; 04-08-2009 at 10:34 PM. |
|
|
|
|
04-08-2009, 10:43 PM
|
#2 | |
|
AF Newbie
Join Date: Jan 2009
Location: MPLS, Minnesota
Posts: 81
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 92 camry v6 tranny problem
When was the last time you changed the fluid? You did not state the miles but will assume there could be more than 150K. If you have not changed the fluid or filter/screen that would be the first thing to do. There should be a drain plug on the pan. It may be one that requires an allen/hex wrench. Drain the fluid;about 3 1/2 quarts should come out. Replace with new fluid, and maybe a conditioner like Lucas. Drive it for a while, maybe even 500-1000 miles or so. Change the fluid again, and see if this makes a difference. Alternatively you could drop the pan and clean the filter/screen or replace that, replace the fluid, drive it then change the fluid again as suggested above. Probably will cost about $30 plus the filter. If this does not work you may need a more expensive fix. I have a 91' 6cyl. It was having a little problem getting into reverse when it got hot. Did the fluid change etc. Works much better but not perfect. KNow its on borrowed time but not in the mode for rebuilding the tranny at 250K miles. Good luck.
|
|
|
|
|
|
04-08-2009, 11:12 PM
|
#3 | |
|
AF Newbie
Join Date: Mar 2009
Location: quebec
Posts: 83
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 92 camry v6 tranny problem
that's what im thinking to do first!if its not work i will change it.but if anyone knows a trick to take the fault code without obd1 reader i will appreciate thanks bob
__________________
98 grand cherokee limited 5.9 swap 249 for 242 tc 73 nova 350 powerglide 90 z-24 3.1 95 mustang 3.8 |
|
|
|
|
|
04-09-2009, 09:16 AM
|
#4 | |
|
Resident Chemist
 
Join Date: Feb 2004
Location: Rockville, Maryland
Posts: 8,586
Thanks: 105
Thanked 157 Times in 157 Posts
|
Re: 92 camry v6 tranny problem
OBDI vehicles don't need a code reader. Two contacts are shorted with a paperclip to get the codes to display.
See the OBDI section of the following post in the FAQ thread: http://www.automotiveforums.com/vbul...0&postcount=31
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
|
|
|
|
04-09-2009, 10:46 AM
|
#5 | ||
|
AF Newbie
Join Date: Mar 2009
Location: quebec
Posts: 83
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 92 camry v6 tranny problem
Quote:
__________________
98 grand cherokee limited 5.9 swap 249 for 242 tc 73 nova 350 powerglide 90 z-24 3.1 95 mustang 3.8 |
||
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
