 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-21-2014, 03:32 PM
|
#1 | |
|
AF Newbie
Join Date: Jun 2014
Location: Chesapeake, Virginia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
1996 Buick Century EGR Problem
I have replaced the Throttle Position Sensor, MAP Sensor, MAF Sensor, and the EGR Valve within the past week. The EGR Code (1406 I believe) keeps returning. I even had it removed at AutoZone to no avail. The car runs beautifully but will suddenly stall, without notice. Oddly enough, moving right turns cause it more than anything. I did notice some moisture at the intake where the EGR mounts but cleaned it out. I hate to quit now after the sensor investment. Suggestions?
|
|
|
|
|
06-21-2014, 08:11 PM
|
#2 | |
|
A990 racer
 Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,988
Thanks: 25
Thanked 380 Times in 372 Posts
|
Re: 1996 Buick Century EGR Problem
Check this link http://engine-codes.com/p1406_chevrolet.html
__________________
|
|
|
|
|
|
06-22-2014, 04:12 PM
|
#3 | |
|
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: 1996 Buick Century EGR Problem
I doubt the EGR has anything to do with the stalls, if they only happen on right turns.....
Check harness connections that they are tight.... Since the EGR was replaced, you need to get a scan tool on this......read EGR position...should be 0 % at idle, or key on, engine off....can do this at a place like AutoZone.... If above zero, since it is a new EGR, there is a possibility the PCM may have to be programmed.....think there was a TSB for this.... |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
