 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
05-13-2016, 02:46 PM
|
#1 | |
|
AF Newbie
Join Date: May 2016
Location: macon, Mississippi
Posts: 1
Thanks: 1
Thanked 0 Times in 0 Posts
|
1995 toyota tacoma
I have a 1995 Toyota Tacoma with a manual transmission that will not go into gear. How can you tell if it is the clutch or the slave cylinder that is bad?
|
|
|
|
|
05-13-2016, 04:08 PM
|
#2 | |
|
AF Regular
Join Date: Dec 2012
Location: Portland, Maine
Posts: 438
Thanks: 0
Thanked 47 Times in 47 Posts
|
Re: 1995 toyota tacoma
If the slave cylinder were bad, you'd be able to feel it through the pedal. It would probably go to the floor with little or no resistance. If the clutch itself were bad it would start making some bad noises when you push the pedal in with the engine running, or the pedal might get stuck.
__________________
"Ok, systems check; the battery is discharging, the oil temperature is very high, the oil pressure is very low, the engine temperature is off the end of the scale, I'm running out of petrol... but the clock is correct!" -James May, in an old, worn out Lamborghini purchased for less than £10,000. 
|
|
|
|
|
| The Following User Says Thank You to MikeCStig For This Useful Post: |
t100 (05-13-2016)
|
|
05-13-2016, 09:14 PM
|
#3 | |
|
AF Regular
Join Date: Apr 2016
Location: McPherson
Posts: 125
Thanks: 0
Thanked 10 Times in 10 Posts
|
Re: 1995 toyota tacoma
Get under it and have somebody press the clutch see if the clutch fork is moving. If no try bleeding the system make sure you are getting pressure to the slave cylinder. If no pressure you have a bad clutch master cylinder.
|
|
|
|
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
