 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
04-10-2010, 09:58 AM
|
#1 | |
|
AF Regular
Join Date: Feb 2006
Location: leominster, Massachusetts
Posts: 100
Thanks: 0
Thanked 0 Times in 0 Posts
|
rotors n' pads
Hi all! Its been a while.
Seeing if anyone has some recommendations for new vented rotors. Basically i had all rotors n pads replaced a almost 2 years ago, Raybestos was installed all around. Lifetime warrantee = hard brake pad material = lotsa heat = warped rotor(s) every 6 months = IM ANNOYED! Brought it to dealer to make sure my calipers were good (as the 4runner's are notorious for frozen caliper pistons) and they were all good. I'd like to know what others like / dont like for brakes on their 4runners. Thanks! |
|
|
|
|
04-26-2010, 01:40 PM
|
#2 | |
|
Resident Chemist
 
Join Date: Feb 2004
Location: Rockville, Maryland
Posts: 8,586
Thanks: 105
Thanked 157 Times in 157 Posts
|
Re: rotors n' pads
Toyota rotors and pads. They lasted me over 100k miles
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
|
|
|
|
06-15-2010, 06:24 PM
|
#3 | |
|
AF - Advisor
Join Date: Dec 2004
Location: Portland, Oregon
Posts: 506
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: rotors n' pads
Exactly what Brian says, I have wasted time and money on anything else!
One thing, have the rotors checked or "trued" MOUNTED on the hubs. Money and time well spent. You will need to CLEAN THEM THUROUGHLY after turning as you don't want the metal shavings in you bearings. Good luck.
__________________
"I cut the header twice, and it's STILL too short!" 
|
|
|
|
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
