 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
05-11-2005, 01:36 PM
|
#1 | |
|
AF Newbie
 Join Date: Jan 2005
Location: montreal
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
|
ignition timing
can anyone tell me what the timing should be on a '93 golf 2.0 with an automatic trans and a/c. thanks
|
|
|
|
|
05-13-2005, 02:52 PM
|
#2 | |
|
AF Fanatic
Join Date: Dec 2003
Location: Western, North Carolina
Posts: 3,023
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ignition timing
The fine tuning of the ignition timing is performed by the ECM. If you pull the cap, rotor & dust shield you will see a small notch in the top of the distributor housing. With the engine set on TDC #1 the rotor should be centered over this notch, the ECM takes over from there. If they are not aligned you must reset the position of the timing belt. Note, the V notch on the flywheel is not TDC, it is the small O beside it that is TDC.
|
|
|
|
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
