Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
11-24-2007, 09:18 AM | #1 | |
AF Newbie
Join Date: Nov 2007
Location: Burlington, North Carolina
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Stanza racing helppppppppp
Hi everyone! I'm a new member. I race what our track calls a extreme car class or some know it as ucars. It is a stock street car, knock out glass, lights, put in a rollcage, racing seat, belts and have a blast. I have run a ford probe for a couple of years but looking for more Hp and torque. The Stanza fits that description but need to know about handling and any adjustments that it may have? All parts have to be stock for that model. I have a 1990 with a 2.4. Any info on this car would be greatly appreciated.
|
|
12-08-2007, 12:44 AM | #2 | |
AF Enthusiast
|
Re: Stanza racing helppppppppp
you already have the best engine offered in the Stanza
There were no performance versions of the Stanza offered that you can get better part off of.
__________________
Dr. Disque - Current cars: 2008 BMW 135i M-Sport 2011 Mazda2 Touring Past cars: 2007 Mazda 6S 5-door MT 1999 Ford Taurus SE Duratec |
|
12-26-2007, 05:29 PM | #3 | |
AF Newbie
Join Date: Jun 2007
Location: albany, New York
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Stanza racing helppppppppp
I'd love to see a pic of your Stanza Lefty. For oval track racing I would remove the front sway bar, align the front wheels 2.5 deg. negative camber on the right front and 1 deg positive on the left front. Set the toe out 1/4". An oval track alignment like that is your cheapest bang for your buck.
I've got a ton of pare parts for that car. Where ya located? Mike |
|
01-08-2008, 03:15 PM | #4 | |
AF Newbie
Thread starter
Join Date: Nov 2007
Location: Burlington, North Carolina
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Stanza racing helppppppppp
wanted to thank u for the info. Don't know of any suspension parts off of any sports cars that will swap? They need to at least look stock.Can only set camber 1.5 degrees on left front. No negative camber. Also if it comes with it you have to run it. Figured since this is a family car springs and shocks will be soft. Thanks again
|
|
|
POST REPLY TO THIS THREAD |
|
|