Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-30-2015, 12:53 PM | #1 | |
AF Newbie
Join Date: Jul 2006
Location: Buffalo, New York
Posts: 85
Thanks: 0
Thanked 1 Time in 1 Post
|
Throttle Valve Cable Adjustment help
Hi guys, I'm attempting to adjust the TV cable on my 92 gtz V6 3sp auto as it is shifting late...I have found the following instructions (which seem simple enough):
Step 1 Stop engine. Step 2 TBI equipped models, Remove air cleaner assembly. Step 3 Push and hold down the metal readjusting tab at the engine end of the cable. Step 4 While holding the tab down, move the slider until it stops against the fitting. Step 5 Release adjustment tab. Step 6 Rotate the throttle lever to the wide-open position, cable will come back and automatically readjust itself. However, I don't know what I'm doing or better yet, looking at when I am trying to do this..I see the throttle, the cable, can move the throttle to wide open but what I'm not seeing/recognizing on the throttle mechanism is: 1. The metal adjusting tab at the engine end of the cable 2. The slider 3. The fitting the slider is supposed to butt up against I've searched and searched and cannot locate a video or pictures on how to properly adjust the cable and have come up blank. If anyone can explain it better or post some pictures or a video, I would be extremely grateful. Thanks!
__________________
Chris S. 2001 Bravada Platinum Ed. 1992 Beretta GTZ |
|
05-31-2015, 09:01 AM | #2 | |
Registered Offender
Join Date: Mar 2006
Location: Rural
Posts: 6,547
Thanks: 7
Thanked 345 Times in 340 Posts
|
Re: Throttle Valve Cable Adjustment help
__________________
Permanent seat assignment on the Group W bench... Automotive Forums Survival Guide |
|
|
POST REPLY TO THIS THREAD |
|
|