 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
02-05-2012, 02:47 PM
|
#1 | |
|
AF Regular
Join Date: Jul 2004
Location: hometown, Washington
Posts: 142
Thanks: 18
Thanked 0 Times in 0 Posts
|
removing header pipe 22re are the bolts reverse threaded?? or how can I find tell?
The bolts are stubborn (kinda expected that) but want to be sure I am fighting in the right direction. In removing header pipe 22re are the bolts reverse threaded?? or how can I find tell?
Thanks |
|
|
|
|
02-05-2012, 03:26 PM
|
#2 | |
|
AF Regular
Thread starter
Join Date: Jul 2004
Location: hometown, Washington
Posts: 142
Thanks: 18
Thanked 0 Times in 0 Posts
|
Re: removing header pipe 22re are the bolts reverse threaded?? or how can I find tell?
Well found out by gettin one bolt to come off they are not reverse threaded. but cant get the other bolt to budge. Dang...
my gun has 260 ft pounds of torque dont know if that is a lot but does not seem like enough. have used lube on th bolt |
|
|
|
|
|
02-08-2012, 05:56 PM
|
#3 | |
|
AF Regular
Join Date: Jul 2005
Location: Cape Breton Island
Posts: 108
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: removing header pipe 22re are the bolts reverse threaded?? or how can I find tell?
I had a 250 ft lb gun, went to a 500 ft lb and it makes a big difference, but you have to be careful, sometimes it's to much torque, worth a try though, in my opinion, and use lots of WD40 or any anti seize lubricant, good luck.
__________________
OzzyO 
|
|
|
|
|
|
03-18-2012, 06:22 PM
|
#4 | |
|
AF -Advisor
Join Date: May 2005
Location: the Socialist State of, Maryland
Posts: 1,005
Thanks: 3
Thanked 20 Times in 19 Posts
|
Re: removing header pipe 22re are the bolts reverse threaded?? or how can I find tell?
Heat may help, if you can get a propane torch to it.
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
