Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
05-17-2004, 08:39 PM | #1 | |
two wheels
|
my mk1.5 project (danger to all 56k, picture intensive)
here we go... the official thread.
this is the 1985 N/A mr2 that i bought on the way home from the junkyards for 100 USD. it had a non-working engine (perfect for what i wanted it for) but because of that, was deemed "not worth anything" as a sportscar. so.... old engine got pulled, new series2 3sgte bought from Japan, and new engine was put in. ...actually, it was a whole lot more involved than that... so I’ll continue. major difficulties: new engine mounts and mounting brackets (all of them...), rewiring the engine to the car, custom drive shafts (a variation on the S/C shafts), some clearancing in the engine bay, custom exhaust and downpipe, new fuel pump... and there were a few other things done to the car... new engine, still in the wrapper out of the wrapper the old engine (eeeewwwwwwwwwwww) pulled old engine, the car is just hanging out... the templates for the mounts in the car the mounts (can't find the picture of them welded in )
__________________
hello, i am Dan No more project cars. I wonder how long that will last... Last edited by ac427cpe; 05-17-2004 at 10:08 PM. |
|
05-17-2004, 09:03 PM | #2 | |
two wheels
Thread starter
|
the new bolt on mounts that i made/adapted (for the bottom of the engine) the new fuel pump and my first attempt at an exhaust... sadly, this won't be used, it's too heavy... i'll just be using the 2.5" pipe to a supertrapp and.... the engine behind the car
__________________
hello, i am Dan No more project cars. I wonder how long that will last... |
|
05-17-2004, 09:38 PM | #3 | |
two wheels
Thread starter
|
the downpipe that i* made
*i = my dad helped... a lot. heat coated and wrapped and painted!
__________________
hello, i am Dan No more project cars. I wonder how long that will last... Last edited by ac427cpe; 05-17-2004 at 10:16 PM. |
|
05-17-2004, 10:01 PM | #4 | |
two wheels
Thread starter
|
and now.... engine IN shots!
from the right side of the car the mounts underneath under the car again, but with the car on the ground. took the car down to mess with stuff, make sure all was well this is how she sits right now. on stands again while i wait for shocks.
__________________
hello, i am Dan No more project cars. I wonder how long that will last... |
|
05-17-2004, 10:15 PM | #5 | |
AF Fanatic
|
Very nice! Now get those damned shocks, and start driving the beast! It's been weeks now.
__________________
Connor - Porsche Nazi since 2001, VW defiler since 2004 This here's a Fabrication forum! My lugnut requires more torque than your LS1 makes. |
|
05-17-2004, 10:19 PM | #6 | |
AF Fanatic
|
AWESOME. you're too cool man.
__________________
when in doubt, throttle. |
|
05-17-2004, 10:27 PM | #7 | |
AF Fanatic
|
Re: my mk1.5 project
damn you man, lookin at the pictures makes me want a ride so much more
|
|
05-18-2004, 07:06 PM | #8 | |
two wheels
Thread starter
|
Re: my mk1.5 project
ah yes... forgot about this, polyurethane bushings
__________________
hello, i am Dan No more project cars. I wonder how long that will last... |
|
05-18-2004, 07:17 PM | #9 | |
AF Fanatic
Join Date: Feb 2002
Location: Phoenix, Arizona
Posts: 6,998
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: my mk1.5 project
Nice. The new Arizona AF sleeper king! there goes my title.
__________________
2002_Nissan_Maxima_6-speed
|
|
05-18-2004, 11:53 PM | #10 | |
AF Fanatic
|
Re: my mk1.5 project
wait till i get ahold of a turbo isuzu impulse and both of you are going down while i roll on 20's (=
|
|
05-20-2004, 12:56 PM | #11 | |
AF Newbie
|
Re: my mk1.5 project
where are you located at?
I am in the process of getting the donor car right now. Already have a motor. I have a couple questions for you. If you want to email me so we can keep it off the board my email is MR2Racer28@hotmail.com PS what is your board name on MR2oc.com? |
|
05-20-2004, 08:03 PM | #12 | |
two wheels
Thread starter
|
Re: my mk1.5 project
i'm Dan S on mr2oc, not there often and when i am i'm in either the 1.5 section or arizona regional board. if you have any questions you can always drop me a PM here.
__________________
hello, i am Dan No more project cars. I wonder how long that will last... |
|
05-20-2004, 08:49 PM | #13 | |
AF Newbie
|
Re: my mk1.5 project
so that explains the U of AZ sticker on the back of the car heh
__________________
88 SC MR2 03 V6 Camry |
|
05-20-2004, 08:52 PM | #14 | |
two wheels
Thread starter
|
Re: my mk1.5 project
AHH!!!! U of A?!?!!?!?!?1?1/ NOOO!!!!! ASU
sorry, ASU > U of A
__________________
hello, i am Dan No more project cars. I wonder how long that will last... |
|
05-20-2004, 09:05 PM | #15 | |
AF Fanatic
|
Re: my mk1.5 project
so u of a is better then asu?
dan no wonder why your going to asu brofe education at its finest |
|
|
POST REPLY TO THIS THREAD |
|
|