Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
10-13-2004, 08:28 PM | #1 | |
AF Newbie
Join Date: Oct 2004
Location: mt pleasant, South Carolina
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
#6 fuse keeps blowing on 2000 Excursion
#6 fuse runs overhead computer, turn signals, rear a/c and back up lights. I replaced it with 15 amp fuse and after a few days it blows again. There is no rhyme or reason when it blows. You can run signal, rear a/c all day long and it won't blow. Then all of a sudden it goes out. Sometimes when the a/c, back up lights and signals are off.
The manual says a 15 amp is the proper fuse. Could it be they spec out a fuse too low in amps? Any suggestions? |
|
10-15-2004, 12:37 PM | #2 | |
AF Regular
|
Re: #6 fuse keeps blowing on 2000 Excursion
do you have signal mirrors?
__________________
-=-=-DANE-=-=- |
|
10-17-2004, 04:21 PM | #3 | |
AF Newbie
Thread starter
Join Date: Oct 2004
Location: mt pleasant, South Carolina
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: #6 fuse keeps blowing on 2000 Excursion
No signal mirrors.
It seem the problem started after we had the passenger side power window replaced due to a break in. This is the window on the middle seat. The window was changed out and the fuse was blown after we got the car back. I thought it was something simple like a fuse so I did not take it back to the shop. But it obviously is more than a bad fuse. |
|
07-24-2012, 02:18 PM | #4 | |
AF Newbie
Join Date: Jul 2012
Location: lexington, Kentucky
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: #6 fuse keeps blowing on 2000 Excursion
Did you ever find out what the problem was with the fuse? in your excursion the number 6 fuse
|
|
07-24-2012, 08:39 PM | #5 | |
AF Enthusiast
Join Date: Mar 2008
Location: garner, North Carolina
Posts: 3,579
Thanks: 86
Thanked 100 Times in 100 Posts
|
Re: #6 fuse keeps blowing on 2000 Excursion
How doe's the window work?
Even though other circuits are not being used, the control module + sensors demand power. If there's 3- circuits to a fuse, try isolating 1 or 2 of the circuits out of loop by a disconnect! 12volts/15 amp fuse = .8 ohms |
|
08-06-2012, 02:43 PM | #6 | |
AF Newbie
Join Date: Aug 2012
Location: Rochester, Minnesota
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: #6 fuse keeps blowing on 2000 Excursion
Sounds like a short in wiring. Pull panel on the door the window was replaced. also follow the wire by wire color to the fuse and disconet on on end check with tester.
|
|
|
POST REPLY TO THIS THREAD |
|
|