Cruise Control Installation

[MikeyTheWootness]

Hello.
In order to add cruise control, is the Cruise Control Handle and the Cruise Control Module all that I'll need, or are there any other things that need to be hooked up to those as well? Thanks!



Cruise Control Handle-
http://electronman.stores.yahoo.net/par22cruisha2.html

Cruise Control Module-
http://cgi.ebay.com/ebaymotors/CRUIS...spagenameZWD1V

[Mangoamerican]

you need the cable for your throttle body too, and im not sure but i think you need the wiring as well, ive put on a few aftermarket cruise controls, but have never attempted to install oem in a car without it allready

[Classicrocjunkie]

www.car-part.com

Search for the dash wiring harness for your car. You need to be very specific when you order one. (abs if you have it, You want the cruise option, manual or automatic) There is a pig tail located on the dash harness which hooks into the computer for the cruise. If you have an auto, you need the brake kill switch and if a manual you need the clutch kill switch as well as the brake kill switch. There is a special bracket as well on the TB you need to hold the throttle cable which was mentioned above.

Its a real pain in the ass, not worth it IMO.

[Mangoamerican]

an aftermarket cruise control is much easier to install.. just calibrating it is a little bit of a pain, but its not too bad if you can read - you can make an oem control arm work with an aftermarket cruise setup - it just takes a little bit of foolinaround in the electronics of the arm

[MikeyTheWootness]

Thanks guys. I might still do it. Dunno.