 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
05-05-2019, 10:53 PM
|
#1 | |
|
AF Newbie
Join Date: Jul 2006
Location: Battle Creek, Michigan
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts
|
S10 Blazer brake issue
I have a 1987 S10 Blazer was a 2.8, 700R4. When I bought the truck the rear brakes were not working, I looked everything over and things looked good. Adjusted the brakes and they still were not working I could turn the wheels with the brakes applied on jack stands. I since have replaced both wheel cylinders, new shoes, drums, and hardware. Still not working, I have re bled all four (4) wheels and still not working like they should.
The P.O has replaced the line from the proportioning valve to the rear hose. Anyone have a suggestion on where I look next ? There is no emergency brake cables or linkage to interfere with the brakes |
|
|
|
|
05-06-2019, 06:37 AM
|
#2 | |
|
Registered Offender
 
Join Date: Mar 2006
Location: Rural
Posts: 6,550
Thanks: 7
Thanked 345 Times in 340 Posts
|
Re: S10 Blazer brake issue
A deteriorating hose can exhibit that behavior. It would also be helpful to investigate the prop valve and master cylinder, since that's about all there is left of the system.
__________________
Permanent seat assignment on the Group W bench... Automotive Forums Survival Guide |
|
|
|
|
|
05-07-2019, 01:59 AM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Jul 2006
Location: Battle Creek, Michigan
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: S10 Blazer brake issue
Well I ordered a new hose today so we will try this before swapping out the master cylinder.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
| Tags |
| blazer , brakes , rear , s10 |
 |
|
|
