Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
04-14-2019, 09:27 PM | #1 | |
AF Newbie
Join Date: Mar 2017
Location: Petal, Mississippi
Posts: 6
Thanks: 5
Thanked 0 Times in 0 Posts
|
2004 Envoy Won't Start After Fusebox Replacement
Hi, everyone.
I recently purchased a 2004 envoy that had the fusebox under the hood short out and melt. I replaced the fusebox with the exact numbers as the old fusebox. Most of the wires in the two blocks I replaced were able to be reconnected, but around 10 needed to be spliced. After doing this, everything works, but the engin won't turn over and start. Battery was tested and is good. Replaced the main fuse connected to the fuse box and everything seems good, but it won't crank. Could someone please help me out? I'm completely at a loss. Thanks in advance. JB |
|
04-15-2019, 09:41 AM | #2 | |
AF Enthusiast
Join Date: Dec 2001
Location: clarksville, Tennessee
Posts: 1,718
Thanks: 26
Thanked 185 Times in 181 Posts
|
Re: 2004 Envoy Won't Start After Fusebox Replacement
You need to check if you are getting 12v to the starter. So what do the dash lights do when you try to start?
__________________
Post back, that's what makes Forums Work. |
|
The Following 2 Users Say Thank You to aleekat For This Useful Post: |
Jennstoosweet (04-15-2019)
|
04-15-2019, 06:48 PM | #3 | ||
AF Newbie
Thread starter
Join Date: Mar 2017
Location: Petal, Mississippi
Posts: 6
Thanks: 5
Thanked 0 Times in 0 Posts
|
Re: 2004 Envoy Won't Start After Fusebox Replacement
Quote:
Again, thanks so much for your help. |
||
|
POST REPLY TO THIS THREAD |
|
|