Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-07-2017, 03:06 PM | #1 | |
AF Newbie
Join Date: Jun 2017
Location: Los Angeles, California
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Spiral Cable/Clock Spring replacement.
I replaced the spiral cable or "clock spring" in my 2008 scion xB with an after market version and found that it was absolutely unnecessary to do so. Now, I have an airbag light on and I have the old clock spring still and I want to put it back in because I can't afford to buy a new OEM clock spring. I'm worried that I am going to break it if it's not wound back up correctly when I put it in. I know the simple thing to do would be to just get a new one and I know that it's not my only option because I have found refurbished clock springs online before so someone winds them back up and sells them again. I guess I should just take the cheap one out to see how many spins it goes one way or the other. There's nothing wrong with the old clock spring I just deduced that it was an issue at the time. Lesson learned. I just want to know if anyone knows how to make sure it's ticked back to the position it needs to be in so I don't break the cable when I turn my steering wheel? Thanks.
|
|
06-07-2017, 07:05 PM | #2 | |
Resident Chemist
|
Re: Spiral Cable/Clock Spring replacement.
I have a 2007 xB Service Manual if you would like to have it. Send me your e-mail address and I'll send you a link.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
|
POST REPLY TO THIS THREAD |
Tags |
cable/clock , spiral , spring |
|
|