Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Dodge > Ram Pickup | Ram SRT10
Register FAQ Community Arcade Calendar
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 02-07-2014, 03:32 PM   #1
TCHRISD
AF Regular
 
Join Date: Mar 2004
Location: HOUSTON, Texas
Posts: 173
Thanks: 1
Thanked 0 Times in 0 Posts
Problem with heater....

I have a 98 1500 V6....120K. It has had an issue with the heater since I bought it over a year ago. It would not reach normal running temperatures and heater would not get hot. I have recently replaced the thermostat (195°). Which helped get it closer to reg temps, but still not there (between 150-170).
Is this a heater core issue?

Any help is appreciated........
TCHRISD is offline   Reply With Quote
Old 02-07-2014, 05:32 PM   #2
Chris Stewart
AF - Advisor
 
Chris Stewart's Avatar
 
Join Date: Mar 2004
Location: Nashville, Tennessee
Posts: 2,920
Thanks: 113
Thanked 41 Times in 39 Posts
Re: Problem with heater....

Most likely.
If any stop leak has been used, it'll collect on the heater core also because of the slow water flow going through it.
I have a similar problem with my Olds Bravada and if it warms up tomorrow, I'll flush mine with the garden hose.
I'll take both heater hoses loose from the engine, slowly apply pressure to one heater hose with the garden hose, flush until it becomes clear then swap to the other heater hose and repeat.
I won't connect the garden hose to the heater hose with any clamp, just slowly put them together so's not to apply too much pressure. Most home water pressure can easily burst the heater core, go slow with a weak stream.
__________________
1992 Bravada, 201K, stock
1997 Bravada, 101K, stock...was "called away"

"Cornbread Red", 2001 Dodge 2500,4X4,HO Cummins Diesel,QC,SWB,6spd.,Banks boost&pyro,US Gage fuel press.,Edge Drag Comp,4"exh.,cowl hood, bhaf, black Holley pump, 140gph...13psi WOT, Vulcan Big Line, kevlar/ceramic single disc clutch, cheapo fuel cooler, 8x.010" vco injector nozzles, Cat turbo 62-65-.70A/R, 497hp 1089 tq 8/25/14

Time to turn so's you don't burn.
Chris Stewart is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Dodge > Ram Pickup | Ram SRT10


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:37 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts