Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-27-2009, 06:16 PM | #1 | |
AF Newbie
Join Date: Nov 2005
Location: cleveland
Posts: 66
Thanks: 0
Thanked 0 Times in 0 Posts
|
remote fob programing
anyone know how to program a new fob for a 98 sable? does not have keyless entry on drivers door.
|
|
06-27-2009, 12:43 PM | #2 | |
Authorized Vendor
Join Date: Sep 2003
Location: Keyless Entry Remotes
Posts: 741
Thanks: 0
Thanked 8 Times in 8 Posts
|
Re: remote fob programing
Do not press brake pedal during REMOTE ENTRY programming procedure as it will immediately exit you from that mode. Electronically unlock the vehicle prior to attempting to enter Remote Entry Programming Mode. Turn ignition from OFF to RUN 8 times with 10 seconds, with the 8th time ending in RUN. All doors will ock then unlock to confirm programming mde. Within 20 seconds press any button on the 1st remote transmitter. Door locks will cycle to confirm programming. Within 20 seconds press any button on the 2nd transmitter. (Up to 4 transmitters total possible.) Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
__________________
Replacement keyless entry remotes available here - up to 90% off - All makes/models from Acura-Volvo, 1988-present - http://www.OriginalKeyless.com |
|
|
POST REPLY TO THIS THREAD |
|
|