1995-2000 Trans/Clutch Removal Guide (PICS)

[JetengineMech]

ok to start with i had a chater in the frount, thought it was bad cv's, fixed them still had the chatter, so i pulled the trans. to chang the clutch. the first time down for the 1994 GEO metro since new 200,000 mils or btter. got it all down got the new kit in stalled, and it was slipping like a old 1 would, adjusted it and played with it and nothing would work. so today i pulled it down again and found the throwout bearing was not setted. so i have found that when going back together DO NOT USE THE CLUTCH arm as a holding or lifting handle LMAO . the stupied things 1 will... do any way got it back up today and will finish it off tomorrow . is there anything i should look at befor i get it all done. Its funny i can work on the FY22 Raptor and the F100-119 engine no problems. but this GEO metor kickes my butt everytime lmao. my wife rebuilt the motot for it why i as in Saudi thank god for a women like her she is a great 1 i tell ya. thanks every1
Chris

[JetengineMech]

ok to start with i had a chater in the frount, thought it was bad cv's, fixed them still had the chatter, so i pulled the trans. to chang the clutch. the first time down for the 1994 GEO metro since new 200,000 mils or btter. got it all down got the new kit in stalled, and it was slipping like a old 1 would, adjusted it and played with it and nothing would work. so today i pulled it down again and found the throwout bearing was not setted. so i have found that when going back together DO NOT USE THE CLUTCH arm as a holding or lifting handle LMAO . the stupied things 1 will... do any way got it back up today and will finish it off tomorrow . is there anything i should look at befor i get it all done. Its funny i can work on the FY22 Raptor and the F100-119 engine no problems. but this GEO metor kickes my butt everytime lmao. my wife rebuilt the motot for it why i as in Saudi thank god for a women like her she is a great 1 i tell ya. thanks every1
Chris

[brivers]

Jet. Your wife rebuilt the motor ? Man ole man, you hit the lottery. You take good care of her. She is one in a billion.

[JetengineMech]

yes my wife and yes she is a great women. she is 1 in a mil. no doubt. car is fixed it was the throwout bearing cocked like i thought. DO NOT LIFE OR PUSH ON THE CLUTCH ARM it will make you redo everything LMAO stupied me .

[Johnny Mullet]

When I did this job on this thread, I also picked up the trans by grabbing the clutch lever, but knew right away that the bearing came off since I heard it.