Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
12-28-2008, 09:18 PM | #1 | |
AF Regular
|
2001 CRV CEL flashing with no codes
I have a 01 crv 4wd EX with a CEL that flashing with no codes i did a tune up adjusted the valves to exact specs.... checked timming changed the plugs wires cap and rotor (all with honda factory parts) and still get a flashing mil... i have a snapon MT2500 and everyonce in a while i get P0304 (miss on #4) but when i cycle the ignition it goes away and then after running for about 20sec it starts flashing the CEL but no codes will be present! my trouble shooter says that if the code doesnt come back ... the ECU has failed can anyone shed some light or have any other ideas???
__________________
Crxce- theoretically if u laid a starter on a table and hooked up the wires would it run??? BLU CIVIC- no...it doesn't have any legs |
|
12-31-2008, 10:49 PM | #2 | |
AF Regular
Thread starter
|
Re: 2001 CRV CEL flashing with no codes
i unhooked the battery for 1min and test drove it and it went away runs like a screaming ape
__________________
Crxce- theoretically if u laid a starter on a table and hooked up the wires would it run??? BLU CIVIC- no...it doesn't have any legs |
|
12-31-2008, 11:49 PM | #3 | |
Off playing with fire.
Join Date: Mar 2001
Location: Las Vegas, Nevada
Posts: 10,371
Thanks: 22
Thanked 20 Times in 16 Posts
|
Re: 2001 CRV CEL flashing with no codes
I usually find that unhooking the battery helps a lot of small issues I cannot seem to answer.
Easy fix by the sounds of it. |
|
|
POST REPLY TO THIS THREAD |
|
|