Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-07-2007, 11:04 PM | #1 | |
AF Newbie
Join Date: Sep 2007
Location: Big Bear City, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Acceleration Problems
I am having acceleration problems with my carburated chevy sprint. i have a huge ammount of power and i have good compression and spark and my timing is correct. what else could it be?
|
|
09-08-2007, 08:56 AM | #2 | |
AF Enthusiast
Join Date: Jun 2007
Location: Rhinelander, Wisconsin
Posts: 1,150
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Acceleration Problems
Brakes dragging ?
|
|
09-10-2007, 05:59 PM | #3 | |
AF Newbie
Thread starter
Join Date: Sep 2007
Location: Big Bear City, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Acceleration Problems
no i am having problems with my secondary stage on my carbeuator, the vacuum is good in the idle stage, but when i accelerate it drops to 10 pounds of vacuum and i lose power. when i let off the gas, the vacuum raises up to 18 pounds then goes back to 15 at idle
|
|
09-11-2007, 08:47 AM | #4 | |
AF Enthusiast
Join Date: Jun 2007
Location: Rhinelander, Wisconsin
Posts: 1,150
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Acceleration Problems
Thats the way the vacuum works. when you open the throttle you will loose vacuum until the engine builds up speed. If you have no power it could be from the timing not advanceing.
|
|
09-11-2007, 01:15 PM | #5 | |
AF Newbie
Thread starter
Join Date: Sep 2007
Location: Big Bear City, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Acceleration Problems
do you know how to test the carbeurator, cause the timing is advancing and i am just having carb problems
|
|
09-11-2007, 02:06 PM | #6 | |
AF Enthusiast
Join Date: Jun 2007
Location: Rhinelander, Wisconsin
Posts: 1,150
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Acceleration Problems
Your jets could be clogged or your float leval low.
|
|
09-12-2007, 02:44 AM | #7 | |
AF Newbie
Thread starter
Join Date: Sep 2007
Location: Big Bear City, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Acceleration Problems
never mind, aparently mt cat was clogged so i need to replace it, and i need to replace the rings like i should have done when i sent the head out for a rebuild
|
|
|
POST REPLY TO THIS THREAD |
|
|