Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-18-2006, 11:59 AM | #1 | |
AF Newbie
Join Date: Sep 2006
Location: Vancouver
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
help removing intake manifold!!!
I'm replacing the head gasket on my 22RE engine. I have removed all the 8 intake manifold bolts, removed 2 pipes, and all the other bolts I can find. But, the manifold will still not come off. Is there any other tricks, or hidden attachments, I might be missing?
|
|
09-18-2006, 12:18 PM | #2 | |
Resident Chemist
|
Re: help removing intake manifold!!!
According to the manual, you install the intake manifold with the delivery pipe, injectors, and No. 1 air pipe with seven bolts, one hexagonal bolt, and two nuts.
Does this help? See the 1993 pick-up manual at the top of this forum in the sticky post.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
09-18-2006, 12:50 PM | #3 | |
AF Newbie
Thread starter
Join Date: Sep 2006
Location: Vancouver
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: help removing intake manifold!!!
thanks Brian. To remove the intake manifold, do I need to unattach or remove the individual fuel injectors from the manifold then? I was not able to figure out how to do that. Also, where do I see the manual in the sticky post? I can't find it. thanks
|
|
09-18-2006, 01:49 PM | #4 | |
Resident Chemist
|
Re: help removing intake manifold!!!
The manual says that you don't have to remove the injectors. This is normal.
Here is the link from the "Combined Toyota Factory Truck Maintenance Manuals" thread: http://personal.utulsa.edu/~nathan-buchanan/93fsm/
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
|
POST REPLY TO THIS THREAD |
|
|