 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
04-11-2006, 11:39 PM
|
#1 | |
|
AF Newbie
Join Date: Mar 2005
Location: La Center, Washington
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
2002 S-10 Blazer Fuel Pressure Regulator
Have a 2002 S-10 Blazer with about 38k miles and I want to replace the Fuel Pressure Regulator. I have all the bolts, electrical hook ups, throttle body, distributor cap, hoses, fuel lines OFF on this darn thing and the PLENUM in take will NOT come off. I can get it about 1/4" up off the manafold below it and move it around some, but is seems to hanging up on something towards the back underneith of it. Any help is appreciated. THANKS
 |
|
|
|
|
04-12-2006, 05:35 AM
|
#2 | |
|
AF -Advisor
 Join Date: Jan 2006
Location: merritt island, Florida
Posts: 661
Thanks: 0
Thanked 2 Times in 1 Post
|
Re: 2002 S-10 Blazer Fuel Pressure Regulator
The injection spider assembly - after you unplug that big connector to it the assembly under the upper intake has a large o-ring on the oval that is tight to maintain a good seal and no vac leaks so it should pull right up and off - and it will allow the upper intake to move around cause the assembly is in a very loose holder that allows self centering on install (or its another quality GM fit your option!) - this all assumes you got all the wiring unplugged.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
