![]() |
![]() |
Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
![]() | ![]() | ||
![]() | ![]() |
| Latest | 0 Rplys |
|
![]() |
![]() ![]() ![]() |
|
Thread Tools |
![]() |
#1 | |
AF Newbie
![]() Join Date: Sep 2003
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Replace serpentine belt
What tool or tools are needed to replace the accesory drive belt ( serpetine belt) to release the tension pulley ??? This is for a 96 Lumina 3.1
|
|
![]() |
![]() |
![]() |
#2 | |
AF Regular
![]() Join Date: Sep 2003
Posts: 77
Thanks: 0
Thanked 0 Times in 0 Posts
|
I used to have a 93 Berretta with the 3.1 and assuming that the design is the same you should have a square end on the tension pulley that you can slip an open end wrench on. I forget the size, but being a good length will help with the leverage. Fit the wrench on the pulley and pull up and slip off the old belt. Hope this helps!!!!
|
|
![]() |
![]() |
![]() |
#3 | |
AF Newbie
|
Re: Replace serpentine belt
Mine uses a 3/8 square drive, such as a ratchet or breaker bar on the tensioner. (Mine also being a '93 3.1) Should be the same on the Gen3 3100SFI.
|
|
![]() |
![]() |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|