Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
12-31-2005, 11:59 PM | #1 | |
AF Newbie
Join Date: Apr 2005
Location: rockford, Minnesota
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
|
87 integra shifter ???
I have a friend that has an '87 Integra with a 5 speed. he let someone test drive it. a few days later he went back to his carand found a few things that seemed to go wrong after the test drive. the windshield wipers quit working, the instrument cluster no longer works, and most troubling... the shift lever moves quite a bit from left to right while in gear, and now when he puts it in reverse it goes into a forward gear. no matter where the lever is, there is no reverse. any help would be great.
jim
__________________
160 stat/ STB/ FWI with K&N/ Pulley Boys MPS with 3.4" pulley/ u-bend and resonator delete/ Custom DHP PCM/ Happy knob... more to come |
|
01-03-2006, 11:24 PM | #2 | |
AF Enthusiast
Join Date: Jan 2005
Location: east coast, Pennsylvania
Posts: 262
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 87 integra shifter ???
did they take the car over night or something?
__________________
26 PSI anyone? |
|
01-04-2006, 05:04 AM | #3 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: rockford, Minnesota
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 87 integra shifter ???
no, there were two young guys that took it out for about half an hour then said they were going to their car to discuss it, then took off in a hurry. anyway... everything was free to fix. the dash was a fuse, the wipers needed some TLC in the linkage, they were a little rusty so WD40 helped out and the trans linkage was the fact that the roll pin that holds the linkage to the trans. had an 8-32 nut and bolt holding it together. we fixed everything with stuff we had in the garage and i bought it for $400 with 111,500 miles. now i need to find a book that shows the fuses cuz there is nothing on the inside of the fuse cover. maybe a Chiltons or an actual service manual from acura.
__________________
160 stat/ STB/ FWI with K&N/ Pulley Boys MPS with 3.4" pulley/ u-bend and resonator delete/ Custom DHP PCM/ Happy knob... more to come |
|
01-04-2006, 11:14 PM | #4 | |
AF Enthusiast
Join Date: Jan 2005
Location: east coast, Pennsylvania
Posts: 262
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 87 integra shifter ???
sounds kind of shady but at least it didn't cost you anything
__________________
26 PSI anyone? |
|
01-05-2006, 07:36 PM | #5 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: rockford, Minnesota
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 87 integra shifter ???
yeah, everything was free. now i was going out to go to work and the bolt that mounts the torsion bar fell out now i need to find out the bolt size so i can get a new one. i'm just glad its only a $400 car and i still have my primary car to drive.
__________________
160 stat/ STB/ FWI with K&N/ Pulley Boys MPS with 3.4" pulley/ u-bend and resonator delete/ Custom DHP PCM/ Happy knob... more to come |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|