Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Jeep > Liberty
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 10-27-2013, 09:00 AM   #1
my02liberty
AF Newbie
 
Join Date: Oct 2013
Location: Reston, Virginia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Cannot drain coolant in my 02 Liberty

I recently purchased a used 2002 Jeep Liberty that had basically been neglected when it came to regularly scheduled maintenance. I have had the radiator flushed since I bought it, but am experiencing heat problems with just luke warm heat. Using the suggestions I've read on this forum and on youtube I've flushed out the heater core with a hose, but it didn't seem to work, so now I'm about to change the thermostat out.

Here's my question: I CANNOT SEEM TO DRAIN THE RADIATOR! I know I can just undo the lower hose, but still, I would just like to know WHY I can't drain it the normal way. I have opened the coolant bleed on the top with an allen wrench and then taken out the plug at the bottom of the radiator, but it's only a few drips. I even tried to open the reservoir cap when the other two were open, resulting in it overflowing from the coolant bleed hole. What am I doing wrong here????
my02liberty is offline   Reply With Quote
Old 10-31-2013, 10:51 AM   #2
aleekat
AF Enthusiast
 
Join Date: Dec 2001
Location: clarksville, Tennessee
Posts: 1,719
Thanks: 26
Thanked 185 Times in 181 Posts
Re: Cannot drain coolant in my 02 Liberty

Probably nothing. Lower drain opening is probably plugged with gunk.
__________________
Post back, that's what makes Forums Work.
aleekat is offline   Reply With Quote
Old 12-08-2013, 07:12 PM   #3
rhandwor
AF Enthusiast
 
Join Date: Sep 2006
Location: Athens, Georgia
Posts: 4,662
Thanks: 0
Thanked 64 Times in 64 Posts
Re: Cannot drain coolant in my 02 Liberty

Quote:
Originally Posted by my02liberty View Post
I recently purchased a used 2002 Jeep Liberty that had basically been neglected when it came to regularly scheduled maintenance. I have had the radiator flushed since I bought it, but am experiencing heat problems with just luke warm heat. Using the suggestions I've read on this forum and on youtube I've flushed out the heater core with a hose, but it didn't seem to work, so now I'm about to change the thermostat out.

Here's my question: I CANNOT SEEM TO DRAIN THE RADIATOR! I know I can just undo the lower hose, but still, I would just like to know WHY I can't drain it the normal way. I have opened the coolant bleed on the top with an allen wrench and then taken out the plug at the bottom of the radiator, but it's only a few drips. I even tried to open the reservoir cap when the other two were open, resulting in it overflowing from the coolant bleed hole. What am I doing wrong here????
Try running a piece of coat hanger through the bleed hole. Just be careful and don't puncture the radiator.
rhandwor is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD


Tags
antifreeze , bleed , coolant , drain , flush
Go Back   Automotive Forums .com Car Chat > Jeep > Liberty

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:19 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts