 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
04-02-2024, 07:49 PM
|
#1 | |
|
AF - Advisor
 
Join Date: Mar 2004
Location: Nashville, Tennessee
Posts: 2,920
Thanks: 113
Thanked 41 Times in 39 Posts
|
Lost ABS
I replaced the Brake master cylinder some time back and one morning the brake pedal went to the floor. The brake line going to the front wheels wasn't tight enough and leaked out fluid so I tightened it, refilled the reservoir, bled air off and everything was OK except the ABS light is On and I have no ABS..
Any ideas?
__________________
1992 Bravada, 201K, stock 1997 Bravada, 101K, stock...was "called away"  "Cornbread Red", 2001 Dodge 2500,4X4,HO Cummins Diesel,QC,SWB,6spd.,Banks boost&pyro,US Gage fuel press.,Edge Drag Comp,4"exh.,cowl hood, bhaf, black Holley pump, 140gph...13psi WOT, Vulcan Big Line, kevlar/ceramic single disc clutch, cheapo fuel cooler, 8x.010" vco injector nozzles, Cat turbo 62-65-.70A/R, 497hp 1089 tq 8/25/14  Time to turn so's you don't burn. 
|
|
|
|
|
04-02-2024, 08:18 PM
|
#2 | |
|
A990 racer
 Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,992
Thanks: 26
Thanked 381 Times in 373 Posts
|
Re: Lost ABS
Chris, sounds like air trapped in the abs unit. Check the bleeding method, newer units need a scanner to do this.
__________________
|
|
|
|
|
|
04-25-2024, 07:08 PM
|
#3 | |
|
AF - Advisor
Join Date: Mar 2004
Location: Nashville, Tennessee
Posts: 2,920
Thanks: 113
Thanked 41 Times in 39 Posts
|
Re: Lost ABS
The FSM keeps referring to the Tech 1 Scan Tool....guess I need to be on the lookout for one before they're gone.
__________________
1992 Bravada, 201K, stock 1997 Bravada, 101K, stock...was "called away" "Cornbread Red", 2001 Dodge 2500,4X4,HO Cummins Diesel,QC,SWB,6spd.,Banks boost&pyro,US Gage fuel press.,Edge Drag Comp,4"exh.,cowl hood, bhaf, black Holley pump, 140gph...13psi WOT, Vulcan Big Line, kevlar/ceramic single disc clutch, cheapo fuel cooler, 8x.010" vco injector nozzles, Cat turbo 62-65-.70A/R, 497hp 1089 tq 8/25/14 Time to turn so's you don't burn.
|
|
|
|
|
|
04-26-2024, 10:53 AM
|
#4 | |
|
Registered Offender
Join Date: Mar 2006
Location: Rural
Posts: 6,550
Thanks: 7
Thanked 345 Times in 340 Posts
|
Re: Lost ABS
Keep in mind that a Snap On MT2500 with the appropriate modules can do the same thing, which may expand the options a bit. That was valid at least up to 2002 for most models, and later on some.
__________________
Permanent seat assignment on the Group W bench... Automotive Forums Survival Guide |
|
|
|
|
| The Following User Says Thank You to Blue Bowtie For This Useful Post: |
Chris Stewart (05-07-2024)
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
