Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-01-2020, 03:10 PM | #1 | |
AF Newbie
Join Date: Mar 2020
Location: Brooklyn, New York
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
1984 Porsche 928 Rebuild/Restomod project
84’ 928 V8 that’s been sitting for years and is in disrepair but clinging onto life. Needs a lot of work. Any and all help/advice is appreciated. Going to be a long term project.
|
|
03-01-2020, 03:13 PM | #2 | |
AF Newbie
Thread starter
Join Date: Mar 2020
Location: Brooklyn, New York
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1984 Porsche 928 Rebuild/Restomod project
Attached a new battery and filled with gas. Electric works to the engine but it wouldn’t turn. Spray carb start in the intake and it started sputtering and attempting to turn but still wouldn’t commit. This leaves me to believe that there’s a fuel issue because it’s getting both air and spark when sprayed through the intake. But in the state that it’s in its most likely and combination of variables
|
|
03-01-2020, 03:14 PM | #3 | |
AF Newbie
Thread starter
Join Date: Mar 2020
Location: Brooklyn, New York
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1984 Porsche 928 Rebuild/Restomod project
Also, if anybody has any experience with the electrical components on these, there are several different schematics and half of them are in German lol the wiring is in nightmare status right now
|
|
|
POST REPLY TO THIS THREAD |
|
|