 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
05-28-2021, 03:32 PM
|
#1 | |
|
AF Newbie
Join Date: May 2021
Location: west frankfort, Illinois
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
1965 Rambler American ride height.
we have a 1965 Rambler American convertible with the 327 c.i.d. engine we have been restoring. Can anyone tell us what the ride height should be, and where to measure it? I'm guessing the front springs are sagging, but have no way to confirm it. The right side tie rod has been rubbing against the idler arm, and put a deep groove into the tie rod. I suspect this is from the springs sagging, but don't want to just start blindly replacing parts. Any advice would be greatly appreciated
|
|
|
|
|
05-28-2021, 05:46 PM
|
#2 | |
|
A990 racer
 Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,994
Thanks: 26
Thanked 381 Times in 373 Posts
|
Re: 1965 Rambler American ride height.
As you probably know the oem shop manual has that info..
__________________
|
|
|
|
|
|
05-28-2021, 06:55 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: May 2021
Location: west frankfort, Illinois
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1965 Rambler American ride height.
I did look in the factory manual, but couldn't find it. I will do some more looking.
|
|
|
|
|
|
05-28-2021, 09:20 PM
|
#4 | |
|
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,994
Thanks: 26
Thanked 381 Times in 373 Posts
|
Re: 1965 Rambler American ride height.
Could be in the frame or suspension sections.
__________________
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
