Our Community is 940,000 Strong. Join Us.


window motor switch


mike561
12-09-2007, 06:51 PM
Can anyone tell me what order the wires connect into the back of the window switch for the rear left door? the original wiring harness fell apart because it was so old and brittle so i just put connecters on the end of each wire. i have 5 wires, brown, green, red, blue and purple, what order do they go in on pins in the back of the switch like this http://i15.photobucket.com/albums/a367/pctvman/w.jpg

mike561
12-09-2007, 09:07 PM
stumpped everyone again

PeteA216
12-10-2007, 11:20 AM
If someone doesn't already answer by then, when I get out of work I'll go into my car, take a switch out and look for yah. ~Pete

mike561
12-10-2007, 11:21 AM
Ok sounds good, thanks, maybe take a pic if you can too

beat88ls
12-10-2007, 11:48 PM
Can anyone tell me what order the wires connect into the back of the window switch for the rear left door? the original wiring harness fell apart because it was so old and brittle so i just put connecters on the end of each wire. i have 5 wires, brown, green, red, blue and purple, what order do they go in on pins in the back of the switch like this [IMG]http://i15.photobucket.com/albums/a367/pctvman/w.jpg[IMG]


lol not busting balls here but did you try looking at the other door to see what color went where?

mike561
12-10-2007, 11:57 PM
I did consider doing that but i dont want the other wiring harness to fall apart either, cause im sure that one is just as brittle as this one was. if i have to though i will as a last resort

PeteA216
12-11-2007, 08:13 AM
Hey sorry, I didn't get a chance to get out there last night. I had some people over. Again, if nobody gives you the answer by tonight I should look by then.

PeteA216
12-11-2007, 10:17 PM
Okay I took off the rear passenger side door switch off and took a look. Suprisingly mine shows no signes of becoming brittle. Anyway, I made a diagram like yours (Mike) and realized that I might have to take off the driver's side rear switch because the colors dont seem to match the ones you stated that you have.
http://www.freewebs.com/petea/wswitch.JPG

mike561
12-11-2007, 11:34 PM
That did the trick, it works again. i sat out there for hours before, switching around all those wires. thanks pete! saved me a trip to the salvage yard and $$ too

PeteA216
12-12-2007, 09:15 AM
No problem, sorry it took so long.

mike561
12-12-2007, 12:39 PM
Its ok

Add your comment to this topic!