Seats for sale and a/c system ?

Selling and reducing =D

Selling off new grey cloth / leather mix rear seats.
Never been sat on , used , placed anything on. Still smell fresh n clean XD -

Selling off complete a/c system minus radiator ( All new , recently replaced yet removed for lack of use. )

Making room in the back for custom box set up like this.

http://www.oz.net/~cdoyle/camaro3.htm

Heh...back seats gotta go

That was a bad ass setup are u doing it yourself, oh yeah and did u take the advice of that guy on that site who said it didnt sound good at all it lasted about a year til i gave up on tuning it?

No..Not that exact way. I think I will go with plexiglass enclosures.and not nearly as big. Due to the fact of limited rear view sight as it is. Especially since I have a dual bandpass subbox holding 2 kicker comp 12's in my back seats. -_- I took the buckets out already but now I just got the fold downs making a flat surface to hold the sub box.I'm just sick of looking at the stupid box everytime I look in the rear view mirror.

Sides the box he designed for that was oversized..Too much air space will make anything sound like shiat..heh , I will only use about 1.4 cubic feet of free air and no ports ( ports suck and sound like shiat too. ) per side. the subs will not be aimed at each other ( Due to the fact they will cancel each other out. ) I will aim them upwards. Run two neons one the ends to add some "Ooooo" effect other than that , I will only be pushing 200 watts to them ( 100 X 2 ) from a sony xplod amp which I have coly mounted in the spare tire compartment =D and hidden all my wires.

i seen this one setup where they went step by step and showed u how to mount the amps inside the backseats with like a plexiglass cover and dual cooling fans w/ neon lights and the enclosure was fiberglass kind of angled outward away from each other sitting face up in the trunk part so u cant see shyt when u look in our rearview

that is pritty tight custom box bad ass. the solar barics ar pritty tight check toughs out good luck

I think I will juust keep it about half way up the ass raise from the seat removal. I'm hoping if I use a the smallest amount of cubic footing I can still pull my full power out of the 12's. I will probably be doing it sunday after making a trip to home depot. If it turns out successfully. I will make up a quality measurement spec sheet and share it if you guys want.