need wiring for escalade hid!!!?!?

asap i need to know the three wires that come off the ballast for escalade hid's. There is a plug that goes into the silver box ballast, you'll see the three wire on the black plug of the ballast. i need to know what those three wires are, where they go, when they are switched, etc...

-johnny
johnnywu2@yahoo.com

Just wanted to know if you ever got an answer to your question because i'm in the same situation. If you did figure it out please let me know. I'm trying to figure out what the 3 prongs on the ballst are I know one is constant power (orange wire), one is ground(black wire), and one is the lo-beam head light power(yellow wire), but i don't know what order they are in. I dont have the wiring harness so I'm trying to hard wire it. So if you know which is which reading from left to right as if you were looking directly into the plug I'd appreciate if you would tell me.

Just wanted to know if you ever got an answer to your question because i'm in the same situation. If you did figure it out please let me know. I'm trying to figure out what the 3 prongs on the ballst are I know one is constant power (orange wire), one is ground(black wire), and one is the lo-beam head light power(yellow wire), but i don't know what order they are in. I dont have the wiring harness so I'm trying to hard wire it. So if you know which is which reading from left to right as if you were looking directly into the plug I'd appreciate if you would tell me.

yeah i got what i needed i will have to email it to you.

-johnnyhatchback@aol.com

here is the diagram i have....

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNjUzNDM1NnM0MTNkZmQzMXk1NDE%3D.jpg