Installed A New Deck..

I Just Installed A New Sony Xplode In My 95 Accord And The Wiring Isnt Correct. When I Take The Key Out And Put Back In The Ignition I Lose All The Memory On My Clock And Radio Settings (goes Back To Factory Presets)... Which Color Wires Do I Have Incorrect?? Any Help Will Be Appreciated.. Thanks

sounds like your 12v constant and switched are reversed, or your ground isn't really a ground. From the head unit they are yellow, red, and black respectively, if you used a wiring harness they should be labeled.

From Wiring Harness Yellow(constant 12v) Attached To Blue W/ White Stipe..

From Wiring Harness Red Attached To Red And Yellow

When I Put Red To Red And Yellow To Yellow No Power...

What Is Usually Standard Color For Remote???

yellow is almost always attached to yellow and red is the same. its been the same in every car ive seen. maybe you just had the battery unhooked or something when you tried to turn it on with the proper wires together.

blue is usually the standard color for your remote wires. Are you using a wiring harness or did you cut off your factory wiring harness and hard wire your cd player in there?

are you using a harness for the car's side of the wires or is this a direct wire to the harness on the radio. If you are direct wiring consult an online manual for your cars wire configuration.