1994 TP 3.8 Overheating in 2 minutes from cold, Help!

I've replaced the drain plug, filled up the radiator with proper coolant/antifreeze, turned on the engine then closed the cap to see the needle going fast to near the red mark. I turned off the engine and touched the cap with my finger but it was cold so I did the same with a hose, not hot.
Any ideas?
Thank you


Well, it seems the problem was not all circuit was filled. I did add more after a while running and now it is working normally (knock wood).

I'm sure it is OK

Probably had an air problem....need to burp the system.....

It's working in normal temperature now. Thanks