1997 jeep wrangler code p0340

engine stopped running, took to autozone and they got code p0340 camshaft position sensor A-circuit intermittent. sold me camshaft sensor in distributor still wont start. got book and claims it is crank sensor on flywheel housing. has any one had this happen to them and how did you repair it.


thank you

The Crankshaft Position Sensor (CPS) often starts going out as early as 90k and sometimes lasts well into the mid-100s. I had the CPS go bad on my 2000. If yours is the same, the CPS is located (if you're in the driver's seat) at the 11 o'clock position on or near the front end of the transmission. You'll need a long extension for your socket, but other than being tough to reach it's a straightforward job. In the Cherokee "FYI - How To" section, there are several descriptions of how to do it. Here is a link for you. (http://www.automotiveforums.com/vbulletin/forumdisplay.php?f=2209)

thank you did that also put in new dist,crankshaft sensor,plugs,wires. took it to dealer they have had it for a day and a halve and still can not find anything. thanks for your help. hope they find something soon.

With all the new parts, I'd start checking wiring harness connections, and also check for worn wires, which could be shorting out and causing the issue.