95 camry le cruise control problem

on my 95 camry le 2.2l and i want to fix my cruise control. when i hit the switch nothing happens, no light nothing. what could be the problem?

Check the cruise control actuator connector is tight. It is on the side of the cruise control actuator at the front of the engine compartment.

could the motor not working cause nothing to happen? is their anyway to take the motor off and test it?

Did you check the actuator connector? That is by far the most common source of this problem.

If the indicator light is not blinking and it is not a poor connection at the actuator connector or wiring, then it is either the switch on the stalk, the cruise control ECU, or the actuator itself. Download the '94 Camry FSM from the link stickied at the top of this forum and diagnose as shown on pages BE-202 (switch), IN-36 (CC ECU), and BE-190, BE-192, and BE-196 (actuator).

well check the accuator it is good and the moduale it is good also so it is switch. how would i go by replacing this or would it be easier to get a universal switch and just splice it into the existing wiring?

well it was the switch as i took it out the wires were breaking off the harness.