Our Community is 940,000 Strong. Join Us.


92 Crown Vic, Need 2 replace FUEL FILTER...


CrownVicChick
08-14-2010, 06:50 AM
Can someone pls share instructions on how to replace the fuel filter? And what brand would you recommend?

way2old
08-14-2010, 03:38 PM
Jack up the vehicle and support it with jack stands. The filter is attached to the drivers side frame lust in front of the rear wheel. There are little white clips that need to be removed so the fuel lines can be removed. Then there is a little screw that needs removed to get the filter offl Here is a small picture.

Blue)(Fusion
08-14-2010, 07:57 PM
I'm not sure what the differences are between the 92-97 and the 98+ models, but on mine, I was able to remove it with a socket wrench (loosen the band holding it in place), and a flat head screwdriver to pry out the quick-release clamps.

I got a Wix filter for about $11 and it came with two new plastic clamps which just slide on both sides of the fuel lines to lock them in place.

If you just drove the car within the past few hours, pop the hood, open the fuse box, and pull the fuel pump fuse and crank the engine a few times. This will depressurize the fuel lines. Fuel will still flow out, mostly from the engine side. This is normal. Have a pan ready.

Here's a picture from a 1998 model.

http://p71interceptor.com/undercarriage/pictures/1998policep71/PICT9652.jpg

CrownVicChick
08-15-2010, 09:33 AM
Thx 4 the post...I appreciate the info.

CrownVicChick
08-15-2010, 09:35 AM
WOW, super helpful!! This car is going 2 be a project 4 me! So much work 2 be done. Thx again

Add your comment to this topic!